My gaming table

The pen/token holders I cut.

Only took about 5 tries to find a good method for doing them. (Hint: Use a hole saw on both ends, then cut the straight lines between with a jigsaw)

The top nearly complete.

The decorative molding I chose.

I left space below the molding so I could use weather stripping to keep the fabric snug.

Cutting the upholstery fabric I used for the top.

There is thin quilt batting layered below this.

Nearly finished!

Just a few games stacked on top to keep the cats off.

Here's a mostly completed shot.

It still needs some work on the underside, and I need to still make the top covering boards. The plug ins also need swapped out for black, but I didn't have any at the time.

Here are a couple cheap dice trays I made using a picture frame and some felt.